|
| |
All prices are F.O.B. Schofield, WI
To
view larger image, click on the photo
 |
Centrifugal
Blower – General Electric Motor
½ Horsepower, 3 phase, 60 Hz, 3450 RPM, 230/460 volt, service factor
1.00, frame 56C, pre-owned dust collector with rubber cord.
$75.00 |
 |
Variable
speed gear reducer – U.S. Motors, I.D. #DD034136
2 Horsepower, 3 phase, 60 Hz, 200-230/460 volt, 8.7-7.2/3.6 amps, frame
size 10-145T-21, type VAV-TF-GD, gear ratio 31.5 to 1, motor RPM 1710, RPM
minimum 13.6 and rpm max 136
$450.00 |
 |
Right
angle gear reducer – Morse model 20W, s/n E97MK0001
Ratio 5 to 1, maximum horsepower 2.26, maximum RPMs 1750, double shaft
output 1”. Pre-owned
surplus
$40.00 |
 |
Linkbelt
worm gear speed reducers – Model U-250-62
15.5 to 1 ratio, input RPM is 1750, service factor 1.00, AGMA horsepower
rating 2.08, output torque 993.
New surplus, 1 available
$125.00 each |
 |
Right
angle gear motor – ABART Model 26DF - Input RPM 1750, input horsepower
rating 1 H.P., s/n N12771, ratio 37 to 1, Out torque 1167 foot pounds.
Includes motor Doerr, 1-1/2 horsepower, 115/230 volt, 1 phase,
frame K56C, 1740 RPMs, 1-1/4” shaft.
Pre-owned surplus
$150.00 |
 |
Right
angle gear motor – Jeffery Power Transmission Division
Ratio 60 to 1, model #5A-63230KH, 1-3/4” output shaft with Doerr
electric motor, 3 horsepower, 230/460 volt, 3 phase.
New surplus
$300.00 |
 |
Right
angle gear motor – Jeffery Electra Motors Division
Ratio 20 to 1, model 4V-44271 JK, 1-3/4” output shaft with Baldor motor,
3 horsepower, 230/460 volt, 3 phase.
New surplus
$300.00 |
 |
Right
angle drive, worm reducer – Grant, Model A
Size 175, 5 to 1 ratio, style STF, ¾” single shaft output.
$40.00 |
 |
Electric
Motors
New machine take-offs originally on mill/drills and drill
presses.
Induction motor, 2 horsepower, 115/230 volt, 1 phase, 1.5 kw, 1720 RPM,
22/11 amps.
17 available
$100 each |
 |
Ingersoll
Rand Model 7100
15
to 20 HP Rebuilt Air Compressor Pump
$1,495.00
|
 |
Ingersoll
Rand Model 15T
2
stage, 15 to 20 HP Rebuilt Pump
$1495.00
|
 |
12"
3 Jaw Lathe Chuck
D1-8 Camlock
Spindle Mount
Miller
Industrial Special: $400.00 |
 |
15"
Slotted Faceplate
Camlock
Spindle 3 Pin
Miller
Industrial Special: $100.00 |
 |
Jet Turret
Drill Press, Model JDT-1 PT
Machine Number
81-190, Date Code 12-2-81
220 Volt Three
Phase 6 Station
5/8-16 Spindle
Thread, 4 Drill Chucks, Number 1 Morse Taper, Flood Coolant System
$3,500.00 |
 |
Clark
Hard Tire L.P. Gas
4000
lb. Capacity Fork Lift
$3,500.00
|
 |
Almost
New!
Hand
Horizontal Mill with Woodruff Key Capacity - Bench Style
$695.00
|
 |
Alda
Alva Punch Press
Approximate
1 Ton Capacity
$250.00
|
 |
Alda
Alva Punch Press
Approximate
1 Ton Capacity
$250.00
|
| Motors |
|
Motor – Westinghouse
1/6 horsepower, frame 56, 115 volt, 1 phase, open, 3 amp, 1758 RPM, 5/8”
shaft.
Pre-owned surplus
$20.00 |
|
Electric
Motor – General Electric, model #5K36KG852
¼ Horsepower, 230/460 volt, 3 phase, 60 Hz, 1140 RPM, frame size 56,
shaft 5/8 x 1-7/8, drip proof, CCW/CW rotation.
New surplus
$25.00 |
|
Electric Motor – Delco, model #1J1821 (s/n G-7)
& (s/n G-76) Frame size 56, ¼ horsepower, 208-220/440 volt, 3
phase, 1755 RPM, 1.18/0.59 amps, service factor 1.35
New surplus, 2 available
$25.00 each |
|
Motor – General Electric - ¼ horsepower, 1725 RPM,
115 volt, 1 phase, 5.6 amps, with ½” shaft.
Pre-owned surplus
$20.00 |
|
Electric Motor – General Electric model #5K35KN54
1/3 Horsepower, 575 volt, 60 Hz, 3 phase, 1725 RPM, frame size 56, CCW/CW
rotation.
New surplus
$40.00 |
|
Electric Motor – General Electric, model #K42HG2553
1/3 Horsepower, 230/460 volt, 3 phase, frame size 56, CCW/CW rotation, 60
Hz, shaft 5/8 x 1-7/8, 1140 RPM.
New surplus, 3 available
$25.00 each |
|
Electric Motor – Westinghouse, model SBFC, motor
style 773B646G11
¾ Horsepower, 230/460 volt, 3 phase, amps 2.9/1.45, s/n 7201, 1750 RPM,
60 Hz, service factor 1.00, NEMA Desc. B, frame 143T, KVA Code L.
New Surplus
$25.00 |
|
Electric Motor – General Motors DELCO Model
G1400C1Z
¾ Horsepower, 230/460 Volt, s/n J-71, 3 phase, 1165 RPM
Frame size 18ZC, amps 3.1/1.55, 60 cycle, and service factor 1.0.;
Continuous duty
$25.00 |
|
Electric Motor – Delco, model 2J8227, s/n D-79
¾ Horsepower, 230/460 volt, 3 phase, 56 frame, 1750 RPM, 2.54/1.27 amps,
service factor 1.0, continuous duty.
New surplus
$25.00 |
|
Electric Motor – Delco, model B7104A1
1 Horsepower, 208-220/440 volt, 3 phase, 1165 RPM, frame size 184.
New surplus
$40.00 |
|
Air
compressor motor – AJAX
1-1/2 Horsepower (2 to 6 horsepower, 1 stage air compressor) 115/230 volt,
1 phase, 3450 RPM, 19/9.5 amps.
New surplus
$100.00 |
|
Dayton
6K313 – Farm Duty motor
2 Horsepower capacitor start, 1740 RPM, 115/230 volt, 60 Hz, 1 phase, ball
bearing, rigid mount, TEFC, 182T frame, 1-1/8 diameter shaft, 4-1/2”
shaft height
2 available
$249.00 each |
|
Electric
Motor – Sterling Electric, model #KB0054FFA,
S/N 88M1605
5 Horsepower, 208-220/460 volt, 3 phase, frame size 184T, 13.6-12.8/6.4
amps, totally enclosed, fan cooled, TEFC service factor 1.5, 60 Hz, 1725
rpm
New surplus
$50.00 |
|
Electric
motor – Marathon Electric IR,
Model 1VJ254TFL5099BPL
7-1/2 Horsepower, 3 phase, 230/460 volt, 1155 RPM, 22/11 amps, frame size
254T, Enc. TEFC, continuous duty, 60 Hz, service factor 1.15
New surplus
$400.00 |
|
Electric
Motor – Baldor
10 Horsepower, 3 phase, industrial air compressor motor, 230/460 volt,
1725 RPM, service factor 1.15, frame size 215T, s/n F292. CCN
32036006IR
$300 |
|
Electric
Motor – Baldor Industrial Motor
Compressor motor, spec #37F428X33, 10 horsepower, 230/360 volt, 3 phase,
1725 RPM, 60 Hz, service factor 1.15, frame size 215T. IRCCN
32036006
New
$400.00 |
|
|
| |
|
